Overview:
1. |
Conditions
for a stable Activation of Water ...
> |
2. |
The
15 principles of function of the GIE® Water
Activation Technology
...
> |
3.
|
Thesis:
Deletion of proper frequencies by electromagnetic turbulation
...
> |
4.
|
Scientific
excursion: Total number of the produced turbulations
in electromagnetic turbulation ...
> |
Conditions for a stable Activation
of Water:
For an effective and stable activation of conventional tap
water the following conditions must be fulfilled:
1. Deletion of the pollutant frequencies
stored in the molecular structure of the water leads to breaking
up the large water cluster (700 molecules) into micro-clusters
(4 - 8 molecules):
-> This goal can be achieved in two ways:
a) Heating of the water to 400°C - technically feasible
only with great effort and it is not efficient from the point
of view of energy.
b) Extreme Turbulation of the water (realised
in the stages 1 to 9 of the
GIE® Water Activation Technology).
2. Neutralization of the pollutants
existing in the water leads to proper frequency loss. Thereby,
the pollutants become, as in the case of the water, carriers
of the imprinted, natural frequency spectrum:
-> This goal can be achieved in two ways:
a) Filtration: has, however, its technical limits in the producible
pore size - see also Physical water treatment - Filtration.
b) Extreme Turbulation of the water with
the advantage that the former pollutants, now neutralized,
can be used as a carrier structure for the desired frequencies
to be imprinted. (realised in the stages 1 to 9 of the
GIE® Water Activation Technology).
3. Effective protection of the equipment
on its inside against electro-smog:
Without such protection the frequencies to be transmitted
to the water imprinted on a substrate (water, quartz, sand)
become appreciably ineffective due to spurious frequencies.
-> This goal can be achieved the following ways:
A screen is formed against effects of electro-smog by very
fine materials (stone flour and quartz crystals with different
granulation mean that there is a different natural oscillation).
This material combination - closely packed around the functional
part of the water activation device - is able to reliably
break the frequencies of electromagnetic interfering radiation
to a speed of zero and thus make them ineffective.
This is realised in stage 12 of the
GIE® Water Activation Technology.
The 15 principles of function of the GIE®
Water Activation Technology:
All of these 15 principles of function
work synchronously and
activate themselves as soon as the usual tap water pressure
of 4 bar is developed:
1.
|
Sub-dividing
the water flow into two tubes after entering the activator
(System Aqua-Ligro).
|
|
2.
|
First Schauberger-Turbulation
caused by rotation in tube windings (System Viktor Schauberger). |
3./
9 .
|
Turbulation
caused by magnetically achieved northern resp. southern
oriented polarity of the water molecules with sudden change
of spin-orientation (System Patrick Flanagan).
|
4.
|
Permanent-magnetic
caused ionisation of the water.
|
5.
|
Permanent-magnetic caused
alteration of the water's lime-structure leads to softer
water which is better for the skin and thereby requires
less consumption of washing powder. |
6. |
Turbulation
caused by 17-fold pressure/suction subsequence in a thousand
intervals ( System Aqua-Ligro). |
7.
|
17-fold high/low-pressure
subsequence in a thousand intervals causes increased Oxygen
concentration, which deactivates the major part of low
organized bacteria. (System Aqua-Ligro). |
8.
|
Turbulation caused by building
strong electro-magnetic fields with different field-vectors.
As the water flows the floating ions make these fields
penetrate the tubes and the space in between them. Therefore,
no electric current is needed. (System Aqua-Ligro). |
10. |
Transmission of the information
of numerous
natural materialistic frequencies. |
11.
|
Transmission
of the information of numerous natural immaterialistic
frequencies as there are red sky, sunset glow, midday
sunlight, full moon light, frequency of the earth's pulsation,
planet's frequencies and other natural frequencies. |
12
|
High
grade shielding against the effects of electro-smog. (System
Aqua-Ligro). |
13. |
Massively
increased integration of oxygen in GIE Water. |
14. |
5-fold
orgon-charging by layer-system (System Wilhelm Reich). |
15.
|
Seocnd Schauberger-Turbulation
caused by rotation in tube windings (System Viktor Schauberger). |
Thesis:
Deletion of proper frequencies by electromagnetic turbulation:
1. Due to the electromagnetic turbulation in:
- Very high amount (10,65 x 1034) and
- extremely efficient arrangement all natural frequencies
are deleted – as well:
- of the water itself as:
- of the pollutants and undesirable materials existing in
the water:
-> They lose their characteristic as pollutants and become
neutral material – ready to receive new frequencies!
2. Most stable imprinting of the energizing frequencies (see
principle of function 10 to 11) both into:
- the neutralised water itself as well as into:
- the former harming pollutants and undesirable materials.
-> These are thereby transformed into carriers of the new
frequencies such as the water!
3. Consequence:
Any filtering of pollutants* becomes superfluous
*: exception: rough materials such as sand, etc.
Scientific excursion:
The total number of the produced turbulations in electromagnetic
turbulation:
1. Per tube and level: 1024 turbulations. (1 Quadrillion!).
2. With four tubes it results in: 4 x 1024 turbulations.
3. Distance between the two magnets: 400 mm.
4. Diameter of a water molecule: approximately 0.15 x 10-9
m (0.15 nanometers).
5. This results in number of levels per mm height: approximately
6.6 million levels.
6. With 400 mm impact height resulting in: 400 mm x 6.6 million
levels / mm = 2.64 billion levels.
The number of turbulations multiplied by the number of levels
results in the total number of electro-magnetic wise produced
tubulations:
4 x 1024 turbulations / level x 2.64 billion levels
= 10.65 x 1034 (10.65 Quintilliards) turbulations!
|